| Series |
435 |
| Cone Part Number |
444 |
| Cup Part Number |
432-B |
| Design Units |
Imperial |
| Bearing Weight |
2.4 lb |
| Cage Type |
Stamped Steel |
| d |
1.5 in |
| D |
3.7500 in |
| D1 - Flange Outer Diameter |
3.9640 in |
| B - Cone Width |
1.1772 in |
| C - Cup Width |
0.8750 in |
| C1 - Cup Flange Width |
0.2188 in |
| T1 - Bearing Width |
1.0938 in |
| T - Bearing Width to Flange |
0.4376 in |
| R - Cone Backface To Clear Radius1 |
0.14 in |
| r - Cup Backface To Clear Radius2 |
0.090 in |
| da - Cone Frontface Backing Diameter |
1.79 in |
| db - Cone Backface Backing Diameter |
2.05 in |
| Da - Cup Frontface Backing Diameter |
3.46 in |
| Ab - Cage-Cone Frontface Clearance |
0.05 in |
| Aa - Cage-Cone Backface Clearance |
0.04 in |
| a - Effective Center Location3 |
-0.36 in |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
7400 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
28500 lbf |
| C0 - Static Radial Rating |
32400 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
3600 lbf |
| K - Factor7 |
2.05 |
| e - ISO Factor8 |
0.28 |
| Y - ISO Factor9 |
2.11 |
| G1 - Heat Generation Factor (Roller-Raceway)10 |
42.5 |
| G2 - Heat Generation Factor (Rib-Roller End) |
11.3 |
| Cg - Geometry Factor11 |
0.0805 |