| Series | 435 |
| Cone Part Number | 444 |
| Cup Part Number | 432-B |
| Design Units | Imperial |
| Bearing Weight | 2.4 lb |
| Cage Type | Stamped Steel |
| d | 1.5 in |
| D | 3.7500 in |
| D1 - Flange Outer Diameter | 3.9640 in |
| B - Cone Width | 1.1772 in |
| C - Cup Width | 0.8750 in |
| C1 - Cup Flange Width | 0.2188 in |
| T1 - Bearing Width | 1.0938 in |
| T - Bearing Width to Flange | 0.4376 in |
| R - Cone Backface To Clear Radius1 | 0.14 in |
| r - Cup Backface To Clear Radius2 | 0.090 in |
| da - Cone Frontface Backing Diameter | 1.79 in |
| db - Cone Backface Backing Diameter | 2.05 in |
| Da - Cup Frontface Backing Diameter | 3.46 in |
| Ab - Cage-Cone Frontface Clearance | 0.05 in |
| Aa - Cage-Cone Backface Clearance | 0.04 in |
| a - Effective Center Location3 | -0.36 in |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 7400 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 28500 lbf |
| C0 - Static Radial Rating | 32400 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 3600 lbf |
| K - Factor7 | 2.05 |
| e - ISO Factor8 | 0.28 |
| Y - ISO Factor9 | 2.11 |
| G1 - Heat Generation Factor (Roller-Raceway)10 | 42.5 |
| G2 - Heat Generation Factor (Rib-Roller End) | 11.3 |
| Cg - Geometry Factor11 | 0.0805 |
